476 G15 + G30 Ø d t G15 14 12 t 6 ø11 85 ø12 G15 G15-150 G15-200 G15-250 17-21 0.15 0.20 0.25 235621 235622 235623 22-27 0.15 0.20 0.25 237762 237763 237764 28-34 0.15 0.20 0.25 235624 235625 235626 35-42 0.15 0.20 0.25 237765 237766 237767 43-53 0.15 0.20 0.25 235627 235628 235629 54-78 0.15 0.20 0.25 237400 237401 237402 79-175 0.15 0.20 0.25 237409 237410 237411 G15 + G30 SMW-AUTOBLOK Type Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. Work piece-Ø Controlled penetration t Id. No. ■ For highest torque transmission Precision gripper G-gripper characteristics Type G grippers have a stop surface for a controlled penetration of the grip tooth. The workpiece is clamped concentric on the stop surface, so that the clamping dia. and the machining dia. are concentric. The high precision of the gripper guarantees concentricity even after replacing worn out grippers. Highest torque transmission is guaranteed with the combination of friction and positive drive. TIN coated high speed steel for long life. You can select the corresponding gripper for all applications according to the grind stock allowance. Gripper with controlled penetration 0.15 - 0.30 mm are standard. Special grippers are available on request. Mounting dimension Dimension to be within + 0.01 mm to tongue and groove / fine serration Measured into sharp corner Gripper G15 fitted without clearance Carbide milling tool Id. No. 139528 (Light duty version) Material: HSS Milling tool center BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=