475 G14-070 G14-100 G14-125 G14-150 G14-175 G14-200 0.070 0.100 0.125 0.150 0.175 0.200 235615 235616 235617 235618 235619 235620 G14 t 6 14 12 ø11 85 ø12 10 19.3 t 15.8 ø15,6 85 ø16 G14 + G25 G14 G25 G25-100 G25-150 G25-200 G25-250 G25-300 0.10 0.15 0.20 0.25 0.30 232704 231275 231276 231277 231278 G14 + G25 ■ With pull down effect Precision gripper G-gripper characteristics Type G grippers have a stop surface for a controlled penetration of the grip tooth. The workpiece is clamped concentric on the stop surface, so that the clamping dia. and the machining dia. are concentric. The high precision of the gripper guarantees concenricity even after replacing worn out grippers. Highest torque transmission is guaranteed with the combination of friction and positive drive. The geometry of the gripper creates a pull down effect on the workpiece. TIN coated high speed steel for long life. You can select the corresponding gripper for all applications according to the grind stock allowance. Gripper with controlled penetration 0.07 - 0.30 mm are standard. Special grippers are available on request. Controlled penetration t of the grip tooth Stop surface SMW-AUTOBLOK Type Controlled penetration t Id. No. Mounting dimension Dimension to be within + 0.01 mm to tongue and groove / fine serration Measured into sharp corner Gripper G14 fitted without clearance Carbide milling tool Id. No. 139528 Dimension to be within + 0.01 mm to tongue and groove / fine serration Measured into sharp corner Gripper G25 fitted without clearance (Light duty version) Material: HSS (Heavy duty version) Material: HSS SMW-AUTOBLOK Type Controlled penetration t Id. No. Mounting dimension Carbide milling tool Id. No. 139540 Milling tool center Milling tool center 12 BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=