88 SMW-AUTOBLOK 327 1400-IL-D 1600-IL-D 1000-IN-D 1250-IN-D 120 100 0 100 200 300 400 160 200 240 320 280 360 400 120 100 160 200 240 320 280 360 400 0 100 200 300 400 500 600 FG F FG F 13114910 13043910 13083910 IN-D 1000 IN-D 1250 IL-D 1400 IL-D 1600 15 15 24 24 57 57 60 60 180 180 200 200 400 400 360 360 600 500 400 360 660 900 1425 1765 84 178 347 562 13083910 13083910 13083910 13083910 13043910 13043910 13043910 13043910 SIN-S 250 SIN-S 250 SIN-S 250 SIN-S 250 77133439 77133449 77133855 77133863 IN-D IL-D Soft top jaws Hard top jaws MODULE 2 SERRATION High precision power chuck Ø 1000 - 1600 mm LONG JAW STROKE MODULE 2 SERRATION Technical data Application/customer benefits • Clamping of large square and irregular shaped parts, using 2 or 4 jaws self centering • Suitable for vertical machines thanks to the front protection of the slide ways IN-D/IL-D: MODULE 2 SERRATED master jaws (pitch 6.28 mm) (Ø 1000 and 1600 mm) Technical features • Gripping force transmission via wedge hook • Protection from contamination with seals along the master jaw profiles • Possibility to use jaw boxes for manual clamping mounted on the T-slots between the master jaws Standard equipment Ordering example 4-jaw chuck 4-jaw chuck IN-D 1600 / Z720 1 set T-nuts with bolts 1 set soft top jaws with cross keys Mounting bolts Grease gun Actual gripping force diagrams Soft and hard top jaws for IN-D and IL-D FG Gripping force (total on all jaws) (kN) Speed (r.p.m.) Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. The data in the diagrams refer to 4-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. SMW-AUTOBLOK Type Radial jaw stroke mm Axial piston stroke mm Max. draw pull* kN Max. gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Hard top jaw (piece) Id. No. Soft top jaw (piece) Id. No. Recommended actuating cylinders Type Id. No. IN-D/IL-D (Center mounting) ■ Closed center ■ Long jaw stroke ■ 4 jaws (all diameters) * For internal clamping reduce the draw pull by 30%. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=