86 SMW-AUTOBLOK 327 120 100 0 100 200 500 630 160 200 240 320 280 360 400 120 100 160 200 240 320 280 360 400 0 100 200 300 400 450 300 400 FG F FG F 1600-ILD-6 1400-ILD-6 1400-ILD-3 1600-ILD-3 1250-IND-3 1000-IND-6 1000-IND-3 1250-IND-6 13114910 13043910 13083910 IN-D 1000 IN-D 1250 IL-D 1400 IL-D 1600 3 6 3 6 3 6 3 6 15 15 24 24 57 57 60 60 180 180 200 200 400 400 360 360 630 500 500 450 450 320 400 280 600 800 1200 1600 68 145 347 562 13083910 13083910 13083910 13083910 13043910 13043910 13043910 13043910 SIN-S 250 SIN-S 250 SIN-S 250 SIN-S 250 77133339 77133349 77133755 77133763 77133639 77133649 77133955 77133963 IN-D IL-D MODULE 2 SERRATION High precision power chuck Ø 1000 - 1600 mm LONG JAW STROKE MODULE 2 SERRATION Technical data Application/customer benefits • Chucking operations of very large components • Suitable for vertical machines thanks to the front protection of the slide ways IN-D/ IL-D: MODULE 2 serrated master jaws (pitch 6.28 mm) (Ø 1000 - 1600 mm) Technical features • Gripping force transmission via wedge hook • Front protection of the slide ways against swarf and chips penetration Standard equipment Ordering example 3- or 6-jaw chuck 3-jaw chuck IL-D 1600 / Z720 1 set T-nuts with bolts or 1 set soft top jaws with cross keys 6-jaw chuck IL-D 1600 / Z720 Mounting bolts Grease gun Actual gripping force diagrams Soft and hard top jaws for IN-D and IL-D Speed (r.p.m.) Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. The data in the diagrams refer to 3-6 jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. Soft top jaws FG Gripping force (total on all jaws) (kN) Hard top jaws SMW-AUTOBLOK Type Number of jaws Radial jaw stroke mm Axial piston stroke mm Max. draw pull* kN Max. gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Hard top jaw (piece) Id. No. Soft top jaw (piece) Id. No. Recommended actuating cylinders Type Id. No. IN-D/ IL-D 3 jaws (Center mounting) Id. No. IN-D/ IL-D 6 jaws (Center mounting) ■ Closed center ■ Long jaw stroke ■ 3 and 6 jaws (all diameters) * For internal clamping reduce the draw pull by 30% BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=