84 IND-CP IND-CP 500 IND-CP 630 IND-CP 800 IND-CP 1000 IND-CP 1250 3 3 3 3 3 7.5 10 10 15 15 28 38 38 57 57 ±2.5 ±2.5 ±2.5 ±3 ±3 100 100 100 150 150 240 240 240 320 320 1500 1000 900 630 500 130 240 320 710 800 4.5 11 24 50 154 SIN-S 150 / 175 / 200 77995033 77996316 77998031 77999023 77999213 800 500 630 1000 1250 180 150 120 90 60 30 0 400 800 1200 1600 210 240 270 350 300 400 FG F INCH SERRATION AND MODULE 2 High precision self centering and compensating power chuck Ø 500 - 1250 mm Application/customer benefits • Clamping of large parts • Self centering clamping of workpieces that need to be centered by the jaws • Compensating clamping of shafts held between centers or centered by other means like collet, mandrel or self centering chucks IND-CP Ø 500-800: Master jaws with INCH SERRATION (3/32’’ x 90º) IND-CP Ø 1000-1250: Master jaws with MODULE 2 TONGUE & GROOVE master jaws on request Technical features • Gripping force transmission via wedge hook • Sealed against swarf and chips • Conversion self centering / compensating with an easy rotation of internal ring • Rotation of the conversion ring with chuck mounted on machine Standard equipment 3-jaw chuck / 1 set T-nuts with screws 1 set soft top jaws with bolts Center point on request Actual gripping force diagram Technical data FG Gripping force (total on 3 jaws) (kN) Speed (r.p.m.) Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. Easy conversion from compensating to self-centering The data in the diagram refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. SMW-AUTOBLOK Type Number of jaws Radial jaw stroke mm Axial piston stroke mm Compensation mm Max. draw pull* kN Max. gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Recommended actuating cylinders Type Id.-No. IND-CP (Center mounting) ■ Closed center ■ 3 jaws Ordering example 3-jaw chuck IND-CP 630 / A15 * For internal clamping reduce the draw pull by 30%. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=