68 SMW-AUTOBLOK 466 SMW-AUTOBLOK 468 SMW-AUTOBLOK 327 215 FG F 100 80 60 40 20 0 1000 2000 3000 4000 5000 6000 400 315 260 FG F 160 120 80 20 0 1000 2000 3000 4000 60 40 140 100 200 210 180 APL-C 215 APL-C 260 APL-C 315 APL-C 400 8.5 9.7 12.1 13.3 21 24 30 33 53 68 80 100 95 125 145 180 4500 3600 2800 2000 19.5 32.5 56 90 0.113 0.28 0.69 1.7 SIN-S 100 / 125 SIN-S 125 / 150 SIN-S 125 / 150 SIN-S 150 / 175 77187821 77187826 77187831 77187840 APL-C TONGUE & GROOVE High precision power chuck Ø 215 - 400 mm Application/customer benefits • For large batch production • Fully sealed, ideal for dry machining of castings and forgings or if high pressure coolant is used • Extra long jaw stroke for clamping / reaching over different diameters on workpieces APL-C: TONGUE & GROOVE master jaws (American Standard) Technical features • EXTRA long jaw stroke • Constant gripping force with permanent grease lubrication • Center bore for coolant and / or air • Chuck body and internal parts case hardened • proofline® chucks = fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck 3-jaw chuck APL-C 215 / A6 Mounting bolts Actual gripping force diagrams Technical data Speed (r.p.m.) Speed (r.p.m.) FG Gripping force (total on 3 jaws) (kN) FG Gripping force (total on 3 jaws) (kN) Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. SMW-AUTOBLOK Type Radial jaw stroke mm Axial piston stroke mm Max. draw pull* kN Max. gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Recommended actuating cylinders Type Id. No. APL-C (Center mounting) ■ Long stroke ■ Closed center ■ 3 jaws ■ proofline® chucks = fully sealed - low maintenance * For internal clamping reduce the draw pull by 30%. fully sealed – low maintenance proo ine® series on request: Tooling Standard Parts Catalog BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=