54 SMW-AUTOBLOK 466 SMW-AUTOBLOK 468 SMW-AUTOBLOK 327 210 165 125 120 100 80 60 40 20 0 1000 2000 3000 4000 5000 6000 7000 FG F 400 315 250 120 100 80 60 40 20 0 1000 2000 3000 4000 FG F 140 160 180 200 210 AN-D 125 AN-M 125 AN-D 165 AN-M 165 AN-D 210 AN-M 210 AN-D 250 AN-M 250 AN-D 315 AN-M 315 AN-D 400 AN-M 400 2323232323234 3.2 3.6 4.4 5 6.3 7 15 17 21 24 30 33 14 20 17 25 25 38 33 50 40 60 50 70 70 40 56 50 72 75 115 100 150 120 180 150 210 210 7000 6000 5000 4000 3200 2400 2000 5.5 9.5 19 32 56 84 0.011 0.032 0.105 0.26 0.69 1.6 SIN-S 85 / 100 SIN-S 100 SIN-S 100 / 125 SIN-S 125 / 150 SIN-S 125 / 150 SIN-S 150 / 175 77140113 77140116 77140121 77140125 77140131 77140140 77140313 77140316 77140321 77140325 77140331 77140340 77140213 77141516 77141521 77141525 77140231 77140240 77140413 77141616 77141621 77141625 77140431 77140440 AN-D AN-M INCH SERRATION High precision power chuck Ø 125 - 400 mm METRIC SERRATION Application/customer benefits • For chucking parts • Suitable for vertical machines AN-D: Master jaws with INCH SERRATION (1/16” x 90°, 3/32“ x 90°) AN-M: Master jaws with METRIC SERRATION (1.5 mm x 60°) (suitable for japanese chuck top jaws) Technical features • Gripping force transmission via wedge hook • Sealed against swarfs and chips • Case hardened body to assure greatest precision and long chuck life Standard equipment Ordering example 2-, 3- or 4-jaw chuck 3-jaw chuck AN-D 210 / A6 1 set T-nuts with bolts or 1 set soft top jaws 2-jaw chuck AN-M 250 / Z220 Mounting bolts Actual gripping force diagrams Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. Speed (r.p.m.) Speed (r.p.m.) FG Gripping force (total on 3 jaws) (kN) FG Gripping force (total on 3 jaws) (kN) The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. Technical data SMW-AUTOBLOK Type Number of jaws Radial jaw stroke mm Axial piston stroke mm Max. draw pull* kN Max. gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Recommended actuating cylinders Type Id-No. AN-D 2 jaws (Center mounting) Id-No. AN-D 3 jaws (4 jaws 77140540) (C. m.) Id-No. AN-M 2 jaws (Center mounting) Id-No. AN-M 3 jaws (4 jaws 77140640) (C. m.) ■ Closed center ■ 2 and 3 jaws (4 jaws only Ø 400 mm) * For internal clamping reduce the draw pull by 30%. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=