473 8 15 6 (~8,9) M4 M4 Ø12,75+0,05 Ø12,75+0,05 7 9,5 Ø12,7 M5 11,9 14,3 9,525 15° 16,5 15,24 M5 11,9 9,525 15,24 16,5 15° 14,3 Ø10,5 14,3 Ø5,5 5,55 D+3,5 D 5 9,5 15° 15,3 7,15 UGE 30 FGH 33 FGH 34 UGE + FGH Grippers Id. No. 71400133 Carbide Tipped with 12 points Id. No. 71400134 Carbide Tipped with 4 blades Gripper for prism jaws and fixtures: For external and internal gripping of rectangular parts. For chuck jaws, fixture jaws and fixtures. Front mounting of bolt. Gripper seat: drilling and tapping can easily be done Bottom of seat can be either 120° (standard drill tool) or f lat. For high production hardening of gripper pocket is recommended. Torx screw driver Id. No. 085961 Mounting instruction: 1. Drilling 12.7 Ø bottom of seat 120° or flat 2. Tapping of thread prism jaws vise optional Inclined grippers with pull-down effect: For external clamping. Very short and forward-positioned clamping area. Rear mounting of bolts. Inclined gripper seat are easy to be machined. For high production hardening of gripper seat is recommended. Parts included: Gripper without screw Mounting instruction for FGH grippers: 1. With 15° inclined top-jaw, mill the Ø 14.3 gripper seat 2. Drill Ø 5.5 as shown on the drawing. 3. Drill Ø 10.5 for the screw’s head. Clamping-Ø Parts included: Gripper with Torx screw Id. No. 089822, solid carbide 12 BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=