466 AN-, AL-, FRC (1) AP-, NT-, FRS(1) APL-, NTL- IN-, IL-, IR-, PTF 2CL-, RAN BH-, BP-, BB-, GSA BH-FC, TPT- KNCS-, HFK-N TSF-, TSR-, TX-, TETSB-, TSB-CP IEP125 A4 24141300 - - - - A5 24151310 A6 24161310 130 / 135 140 Z120 A5 075421 - - - - - - - - 140 Z130 A5 24151400 A4 24141400 - - A6 24161410 - - 160 / 165 A5 24151600 24151700* A4 24141600 - - A6 24161610 A8 24181710 170 Z140 170 Z160 A6 24161720 A5 24151720 - - A8 24181720 - - 175 200 A6 24162000 24162500* A5 24152000 - - A8 24182010 - - 210 / 215 220 / 225 260 Z170 250 A8 24182500 24182510* A6 24162530 A5 24152500 A11 24112510 - - 260 Z220 315 Z220 320 Z280 A11 24113500 A6 24163500 315 / 320 A11 24113100 24113110* A8 24183100 24184000* A6 24163100 A15 24123110 - - 330 Z300 400 Z300 450 Z300 500 Z300 400 Z380 A15 24125000 24127100* A11 24115000 A8 24185000 A20 24175000 - - 480 Z380 500 Z380 630 Z380 800 Z380 630 / 800 A20 24178000 A15 24126100 A11 24116100 - - - - 1000 Z520 1250 Z520 1400 Z720 - - A20 24179400 - - - - - - 1600 Z720 1800 Z720 2000 Z720 ■ Flange FF 1 - direct mounting Flange mounted onto the chuck. The chuck is directly mounted onto the spindle nose. ■ Flange FF 2 - reduced mounting Used when the spindle nose is smaller than the standard one on the chuck. The flange is mounted onto the spindle prior to the chuck. ■ Flange FF 3 - extended mounting Used when the spindle nose is bigger than the standard one on the chuck. The flange is mounted onto the spindle prior to the chuck. The easy way to adapt your SMW-AUTOBLOK chuck to your machine spindle * Suggestion: This flange is thicker than the standard one, to be used only if necessary! Note (1): For 285 FRC / FRS see 250 AN-, for 365 FRC/FRS see 400 ANChuck models Flange FF 1 Flange FF 2 Flange FF 3 Chuck Ø Spindle nose Flange Id. number Spindle nose Flange Id. number Spindle nose Flange Id. number Spindle nose Flange Id. number Spindle nose Flange Id. number Chuck flanges Mounting flanges on short taper spindle noses Application/customer benefits • Chuck flanges for short taper mount spindles (DIN 55026 / ISO-A 702/1) • Easy installation of chucks on the machine spindle Flange FF 1 = Direct mounting Flange FF 2 = Reduction of taper Flange FF 3 = Increase of taper Technical data • Case hardened flanges (up to Ø 220) • High precision grinding of the taper and all reference dimensions Standard equipment Fixing bolts of the indirect mounting flange on the spindle nose Ordering example Direct flange FF 1 A6 Id. No. 24162000 or Reduction flange FF 2 A5 Id. No. 24152000 DIN 55026 / ISO-A 702/1 ■ Direct and indirect mounting ■ Reduction and extension flanges BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=