444 CL-C Ø 80 − 160 CL-D Ø 200 − 315 AN-D/AN-M Ø 125 − 315 AL-D/AL-M Ø 125 − 315 AN-C Ø 165 − 315 US-CL US-A Stationary cylinder + chuck unit Ø 80 - 315 mm Application/customer benefits • Gripping units designed to suit special purpose machines and transfer lines • Also used as loading chucks to handle workpieces Technical features • Stationary hydraulic cylinder + chuck unit consisting of a modular cylinder and standard 2- or 3-jaw chuck • Permanent oil pressure required • For chuck details please see technical data of the selected chuck Remark: when ordering please specify the position of the oil connectors (on the side or on the back) Standard equipment Standard chuck with cylinder and connecting parts Ordering example US 125-CLC with rear oil connection, or US 250-AND with side oil connection and chuck 90° revolved ■ US-CL-C = cylinder equipped with a 2 jaw chuck type CL-C (long stroke / tongue & groove). Chuck Ø 80 to 160 mm. ■ US-CL-D = cylinder equipped with a 2 jaw chuck type CL-D (long stroke / inch serration). Chuck Ø 200 to 315 mm. ■ US-AN-D = cylinder equipped with a 3 jaw chuck type AN-D (normal stroke / inch serration). Chuck Ø 125 to 315 mm. ■ US-AN-M = cylinder equipped with a 3 jaw chuck type AN-M (normal stroke / metric serration). Chuck Ø 125 to 315 mm. ■ US-AL-D = cylinder equipped with a 3 jaw chuck type AL-D (long stroke / inch serration). Chuck Ø 125 to 315 mm. ■ US-AL-M = cylinder equipped with a 3 jaw chuck type AL-M (long stroke / metric serration). Chuck Ø 125 to 315 mm. ■ US-AN-C = cylinder equipped with a 3 jaw chuck type AN-C (normal stroke / tongue & groove). Chuck Ø 165 to 315 mm. ■ Special units = on request the US cylinder can be equipped with other chucks, for example with a quick jaw change chuck type AN-RM with stationary cylinder available. US cylinder Side oil connections CL chuck in standard position CL chuck 90° revolved AN / AL chuck in standard position AN / AL chuck 90° revolved Side oil connections Side oil connections Rear oil connections Rear oil connections Side oil connections Rear oil connections Rear oil connections Side oil connections Side oil connections ■ The chuck can be mounted on the cylinder 90° revolved if the standard position creates interferences with the working cycle. Please specify in the order, if a revolved position is needed. ■ The oil connections can be on the side or on the back of the cylinder in order to ease the installation of the gripping unit. Please specify in the order, which version is preferred. With 2-jaw long stroke chuck With 3-jaw long or normal stroke chuck ■ Hydraulic cylinder module + chuck ■ Closed center chucks type CL / AN / AL BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=