424 SRG / SRG-B 4 5 2 1 3 Grinding Steady Rest Grinding Steady Rests Application/customer benefits • Support of shaft type workpieces on grinding machines • Particularly suitable for the machining of crankshafts and camshafts • Rapid set up of the Steady Rest to the grinding center with the sensitive fine adjustment of the grinding center • Suitable for follow down grinding • Retractable Steady Rest arms for autoloading of workpieces • Monitoring of end positions for process safety Standard equipment Basic grinding Steady Rest SRG (Padholder for the middle piece, clamping kit and pad kits are not scope of delivery. For these parts please see the overview for the configurations below) • Consisting of padholder middle piece (incl. mounting material). • 3 versions available: 0 degree, ± 5 degree, ± 7 degree. • Can be rotated by 180 degrees. • Consisting of 2 nests for the arms and 1 padholder for the middle piece (incl. mounting material). • The different clamping ranges can be covered with different clamping kits. • Consisting of 3 pads incl. 3 mounting screws. • Standard for clamping range as shown on the Steady Rest. • Special pad kit for shifting of the clamping range -5 mm available. ■ Fine adjustment of the center ■ Retractable Steady Rest arms Technical details Overview Configuration Select padholder for the middle piece (SRG 1, 1S, 2) Select clamping kit (SRG 2F, 3F, 4F, 5F, 5.1FS | SRG-B 4F, 5F) Select Pad kit 1. Horizontal fine adjustment of the grinding center. 2. Vertical fine adjustment of the grinding center. 3. Retractable Steady Rest arms. 4. Port for compressed air against dust and coolant. 5. Monitoring of end positions with proximity switches (switches not included). BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=