40 SMW-AUTOBLOK z1 z2 z1 z2 Weight-optimised chuck body with recesses for best accessibility Direct pressure lubrication system CENTCO 4-MLW 4-JAW MANUAL CHUCK POSSIBLE COST SAVINGS calculation example 3-chuck body normal chuck body €/set Centco4-MLW €/set 1x Special jaws 1.500,-€ 1x Standard jaws 500,-€ 1x Standard jaws 375,-€ 1x Standard jaws 500,-€ 1x Special jaws 1.750,-€ 1x Standard jaws 500,-€ 1x Special jaws 2.000,-€ 1x Standard jaws 500,-€ Total at 1 set of jaws respectively 5.625,-€ Total at 1 set of jaws respectively 2000,-€ Cost savings at 1 set of jaws 0 € Cost savings at 1 set of jaws 3.625,-€ In the beginning the jaw pairs Z1 and Z2 only apply a centering force that is necessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the clamping force necessary for machining is applied. 2+2 self centering + compensating clamping Examples for workpieces of round, square / rectangular workpieces iregular shaped and thin-walled, BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=