34 PTF 530 PTF 660 PTF 800 PTF 1000 PTF 1250 PTF 1400 PTF 1600 PTF 2000 45 60 55 60 60 60 60 80 300 300 300 600 600 700 700 700 160 160 160 360 360 360 360 360 1000 800 600 550 450 380 340 280 216 357 55 730 930 1435 1860 2730 8 20 46 89 183 364 565 1380 13085300 13085300 13085300 13086310 13086310 13086310 13086310 13086310 13045300 13045300 13045300 13046310 13046310 13046310 13046310 13046310 77137053 77137066 77137080 77137039 77137049 77137055 77137063 77137079 PTF 90 38,1 76,2 19,03 83 140 223 62 55 19,03 125 145 104 76,2 76,2 270 38,1 38,1 21 21 37 47 50 82 69 151 19,03 38,1 38,1 185 95 19,03 78 107 3/4" G 13086310 13085300 13046310 13045300 High precision 4-jaw independent manual chuck Ø 530 - 2000 mm TONGUE & GROOVE Manual clamping and radial setting of jaws Application/customer benefits • Clamping of large round, square and irregular parts • Manual, radial setting of component and manual clamping • Suitable for vertical machines. Strong body and master jaws design and option to easily mount a strong center point • High gripping force allowed by the strong design, with the option to increase it with a torque multiplier • Tongue & groove master jaws (type “American Standard”) Technical features • Manual gripping force applied by a strong and protected screw on a strong and rigid master jaw • Manual and fine setting of master jaws for workpiece centering • Protection from contamination with seals along the master jaw profiles • Possibility to use jaw boxes for manual clamping mounted on the T-slots between the master jaws Standard equipment 4-jaw independent manual chuck 1 set of soft top jaws 1 regulation and actuation key 1 grease gun and 500g grease Soft and hard top jaws for PTF Optional: 5:1 torque multiplier soft top jaws hard top jaws Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce operating torque / rotating speed accordingly. Optional 5:1 torque multiplier To achieve the maximum gripping force and speed, the easiest and most comfortable way is to use this multiplier that will increase 5 times the input torque. Id. No. 13506320 Technical data SMW-AUTOBLOK Type Radial jaw stroke (manual setting) mm Max. manual operating torque Nm Max. total gripping force* kN Max. speed r.p.m. Weight (without top jaws) kg Moment of inertia kg·m2 Hard top jaw (piece) Id. No. Soft top jaw (piece) Id. No. Id. No. PTF ■ Closed center ■ 4 jaws (all diameters) Ordering example 4-jaw independent chuck PTF 1600 / Z720 Id. No. 77137063 Option: 5:1 torque multiplier Id. No. 13506320 * at max. torque. ! BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=