262 S G G1 ØD ØE ØA J B ØT C ØF ØD1 D-PLUS 260 D-PLUS 315 225 275 A 260 315 B 111 111 C 125 125 D1 227 275 E 225 275 F 140 171.4 G M16 M16 G1 M42 x 1.5 M60 x 1.5 J 6 6 P H6 45 63 S 1.5 1.5 T 32 50 F1 0-25 0-30 F2 25 30 0.45 0.75 44 65 SIN-DFR SIN-DFR D-PLUS Diaphragm chuck QUICK JAW CHANGE SYSTEMS Open center diaphragm chuck Subject to technical changes. For more detailed information please ask our customer service. Jaws and clamping ranges see chuck type D SMW-AUTOBLOK Type Mounting Size mm mm mm mm mm mm mm mm Piston stroke mm Through-hole mm Draw pull min. / max.* kN Draw push for chuck open kN Moment of inertia kg·m2 Weight without top tooling kg Recommended actuating cylinders Type Advice: The max. allowed speed for the application is permanently marked on the corresponding top jaws and must not be exceeded. Advice: Please note, that it is important, that the cylinder force for pushing and pulling can be set to different values independently! Important: Never rotate the chuck without inserted jaws, otherwise the centrifugal force compensation mechanism will get damaged. * Additional actuation force to the diaphragm spring clamping force applied by the clamping cylinder. ■ Main dimensions and technical data BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=