CSC 1 2 3 4 Step 1, loading of the workpiece: • The centers are retracted • The jaws are retracted and open Step 2, create the Z = 0 position: • The left center point moves forward to its end stop to create the Z = 0 position and is locked • The jaws are retracted and open Step 3, centering the workpiece: • the right center moves forward to center the workpiece between the 2 centers and is locked Step 4, clamping the workpiece: • The jaws move forward and clamp the work piece with a pull down effect • The jaw carrier is locked Crank shaft chuck with retractable jaws CSC with center for the axial positioning of the workpiece Clamping compensating or self-centering Pull down of the workpiece to the centerpoint by pivoting movement of the jaws fully sealed – low maintenance proo ine® series Axially movable and lockable center point for centering and for Z = 0 position 234 BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=