228 Shaft chuck with Constant lubrication / filled with oil. Face driver power operated via double piston cylinder or with spring loaded center Balancing chambers for fine balancing on the machine Jaw carrier, retracted The workpiece is driven by the face driver The application: Complete machining of shafts in one setup 1. Machine clamping dia. (only necessary when using the self centering chuck): The jaws are retracted. The component is clamped between centers and driven by the face driver. This operation can be eliminated if the clamping dia. is already machined when the center bore is manufactured. This operation is not necessary when using the chuck with compensating jaws. 2. Rough machining: The part is driven with the high gripping force of the jaws. High chip removal is possible. 3. Finish machining: The chuck body is retracted. The part is clamped between centers and driven by the face driver. The complete outline can be machined with perfect concentricity. fully sealed – low maintenance proo ine® series Complete machining of shafts BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=