200 SMW-AUTOBLOK 472 SMW-AUTOBLOK 466 SMW-AUTOBLOK 327 TPT-C 500 2+2 TPT-C 630 2+2 TPT-C 800 2+2 8.5 10 10 32 38 38 180 325 550 6 16 44 77995007 77996307 77998007 TPT-C 500 2+2 TPT-C 630 2+2 TPT-C 800 2+2 80 80 80 160 160 160 30 30 30 800 630 500 SIN-S 175-200 SIN-S 175-200 SIN-S 175-200 TPT-C 500 2+2 TPT-C 630 2+2 TPT-C 800 2+2 67 67 67 50 50 50 160 160 160 120 120 120 1200 850 700 DCE 140 / 140 DCE 140 / 140 DCE 140 / 140 TPT-C *** SMW-AUTOBLOK 340: 2+2 independent jaw movement TONGUE & GROOVE High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 500 - 800 mm Application/customer benefits • Clamping of rectangular and square workpieces, self-centering in two axes Technical features • 2+2 jaw chuck with 2 independent self-centering jaw drives (two wedge drives) • Jaw No. 1 + 3 (clamping jaws): power operated • Jaw No. 2 + 4 (centering jaws): spring operated or optionally power operated* • High quality cast iron body for lightweight and durability • Protection from contamination with seals along the master jaw profiles Standard equipment* Ordering example 2+2 jaw chuck Power chuck TPT-C 500 2+2 Z380 1 set of T-nuts and bolts or 1 set of soft top jaws Power chuck TPT-C 800 2+2 A15 Mounting bolts A One wedge drive Operated by standard closed center cylinders. Jaws 2 and 4 are spring operated to center the component in one axis. Jaws 1 and 3 are power operated by the cylinder to center the component on the second axis and to apply the gripping force to drive the component. For external clamping only (on request internal clamping). See specific draw pull, gripping force and maximum speed in the technical data table below. Technical data A ONE wedge drive B TWO independent wedge drives ** For internal clamping reduce the draw pull by 30%. B Two independent wedge drives* Operated by independent double piston cylinders. Jaws 2 and 4 are power operated (using the small cylinder) to center the component in one axis. Jaws 1 and 3 are also power operated (using the large cylinder) to center the component on the second axis and to apply the gripping force to drive the component. Since both pair of jaws are power operated the chuck can reach higher speeds. See specific draw pull, gripping force and maximum speed in the technical data table below. *Note: The chucks are always delivered as „one wedge drive“ version: To use them as „two independent wedge drives“ version, just remove the internal „spring assembly“ according to instruction manual. SMW-AUTOBLOK Type Number of jaws Radial jaw stroke mm Wedge stroke mm Weight (plain back without top jaws) kg Moment of inertia kg·m2 Id. No. TPT-C (center mounting) SMW-AUTOBLOK Type Number of jaws Max. draw pull** (clamping wedge, jaw 1 + 3) kN Max. gripping force jaw 1 + 3 (power operated) kN Max. centering force jaw 2 + 4 (spring operated) kN Max. speed r.p.m. Recommended actuating cylinders Type SMW-AUTOBLOK Type Number of jaws Max. draw pull** (clamping wedge, jaw 1 + 3) kN Max. draw pull** (centering wedge, jaw 2 + 4) kN Max. gripping force jaw 1 + 3 (power operated) kN Max. centering force jaw 2 + 4 (power operated) kN Max. speed r.p.m. Recommended actuating cylinders*** Type ■ Closed center ■ Tongue & groove Technical details of DCE cylinders see general catalog. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=