196 SMW-AUTOBLOK 472 SMW-AUTOBLOK 466 SMW-AUTOBLOK 327 FRS 215 FRS 285 FRS 365 6° 6° 6° 6.3 7.3 8.4 22 26 31 45 70 110 100 150 240 4500 3500 2500 30 62 120 0.17 0.65 2 SIN-S 100 - 125 SIN-S 125 - 150 SIN-S 150 - 200 77818521 77818528 77818536 FRS Self centering clamping TONGUE & GROOVE Lever chuck Ø 215 - 365 mm ■ FRS self centering chuck with pull-down The pull-down of the chuck pulls the workpiece against the workstop. The large bore allows the workpiece to be swallowed. Technical data Application/customer benefits • Self centering clamping of flange or shaft type workpieces where the reference is not a center but the O.D. of the workpiece • The through-hole of the chuck allows to swallow the workpiece if needed • Due to its high rigidity against torsion the chuck can be used for turning as well as for milling Technical features • For O.D. clamping only • Large through-hole • Tongue & groove base jaws • Pull-down to axial datum • Permanent grease lubrication • Rigid design against torsion • proofline® chucks = fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck Mounting bolts 3-jaw chuck FRS 285 Z 220 SMW-AUTOBLOK Type Angular jaw stroke deg. Radial jaw stroke at distance h mm Wedge stroke mm Max. draw pull kN Max. gripping force at distance h kN Max. speed* r.p.m. Weight (plain back without top jaws) kg Moment of inertia kg·m2 Recommended actuating cylinders Type Id. No. FRS ■ Self centering clamping ■ Large through-hole ■ proofline® chucks = fully sealed - low maintenance fully sealed – low maintenance proo ine® series * The above maximum speed is allowed with standard weight / height top jaws and applying the full draw pull only. For more information please contact SMW-AUTOBLOK. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=