184 SMW-AUTOBLOK 472 SMW-AUTOBLOK 466 SMW-AUTOBLOK 327 TSF-CP 135 TSR-CP 135 TSF-CP 170 TSR-CP 170 TSF-CP 210 TSR-CP 210 TSF-CP 250 TSR-CP 250 TSF-CP 315 TSR-CP 315 TSF-CP 400 TSR-CP 400 TSF-CP 530 TSR-CP 530 TSF-CP 650 TSR-CP 650 5° 5.2° 5.2° 4.9° 4.9° 4.7° 4.7° 5° 3.4 5.3 6.3 7 7 7.5 7.5 9.8 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.4 16 21 25 25 25 30 30 32 ±0.7 ±1 ±1.5 ±2.5 ±2.5 ±2.5 ±2.5 ±3 12 18 25 40 40 50 60 100 29 44 60 96 96 120 150 180 8000 5000 4500 3800 3000 2200 1800 1600 4.5 15 27 41 66 115 196 386 0.015 0.06 0.16 0.34 0.83 2.3 7 21 SIN-S 70 85 100 125 125 150 150-175 150-175-200 77196313 77196317*** 77196321 77196325 77196331 77196340 77196353 77196365 77196413 77196417*** 77196421 77196425 77196431 77196440 77196453 77196465 A A TSF-CP TSR-CP TSF-CP/TSR-CP TSF-CP/TSR-CP TSF-CP TSR-CP *** TSF-CP 170 Z140 / 170 Z160 77196318. TSR-CP 170 Z140 / 170 Z160 77196418. Application/customer benefits • Clamping of shafts or chuck parts where the reference is not the O.D. but a center or a centering diameter • A center point or a centering insert will center the workpieces and the jaws will clamp compensating and actively pull the workpiece down to the datum TSF-CP: Compensating clamping with active pull down and floating base jaws TSR-CP: Compensating clamping with active pull down and rigid base jaws Technical features • Active pull-down • Compensating clamping • Centrifugal force compensation • TONGUE & GROOVE base jaws • Central bore for coolant and / or air • Permanent grease lubrication • proofline® chucks = fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck Mounting bolts 3-jaw chuck TSF-CP 210 / A6 or 3-jaw chuck TSR-CP 315 / Z220 Compensating Floating jaws Compensating pull-down chuck Ø 135 - 650 mm Compensating Rigid jaws ■ The workpiece is actively pulled down to the center point. The tailstock just supplies the necessary force to support the workpiece. The result is an exact cylindrical and straight workpiece. ■ The workpiece is lifted by the jaws from the center point. When a higher tailstock force is applied for compensation, the workpiece will be bent. Technical data Floating jaws Rigid jaws Non active pull down compensating chuck Principle of function: ■ 1 compensating pre-clamping - 2 active pull-down - 3 clamping * The above maximum speed is allowed with standard weight / height top jaws and applying the full draw pull only. For more information please contact SMW-AUTOBLOK. ** For internal clamping reduce the draw pull by 30%. SMW-AUTOBLOK Type Angular jaw stroke U° deg. Radial jaw stroke at distance h mm Pull down movement (standard) mm Axial piston stroke mm Compensation (on the dia.) at distance h mm Max. draw pull** kN Max. gripping force at distance h** kN Max. speed* r.p.m. Weight (plain back without top jaws) kg Moment of inertia kg·m2 Recommended actuating cylinders Id. No. TSF-CP (center mounting) Id. No. TSR-CP (center mounting) ■ Active pull-down ■ Tongue & groove ■ 3 jaws fully sealed – low maintenance proo ine® series on request: Tooling Standard Parts Catalog BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=