130 Centco4 Z1 Z1 Z2 Z2 INCH / METRIC SERRATION 4-jaw chuck Application/customer benefits • Independent self centering clamping in 2 axis via 1 central actuating mechanism • Mechanical centering of the workpiece • Standard cylinder can be used for actuating • Clamping of every workpiece geometry possible • Less workpiece deformation compared to 3-jaw chucks • Long lifetime due to case hardened parts • Large range of standard top jaws • Suitable für OD and ID clamping Technical features • Centrifugal force compensation • Optimized lubrication system • Large through-hole • Jaw interface inch / metric • Standard equipment Ordering example 4-jaw chuck, 4-jaw chuck 8 pieces T-nuts and bolts Centco4-260-7-Z-220 ■ 2+2 self centering ■ Independent self centering clamping in 2 axis ■ Centrifugal force compensation Function / Application examples 2+2 self centering and compensating clamping* 2+2 self centering and compensating clamping of rectangular or square workpieces 2+2 self centering and compensating clamping of unshaped workpieces 2+2 self centering clamping of round or thinwalled workpieces * Z1: Self centering clamping axis 1 / Z2: self centering clamping axis 2. Z1 is compensating to Z2. In the beginning the jaw pairs Z1 + Z2 only apply a force that is necessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the grip force necessary for machining is applied. BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=