128 SMW-AUTOBLOK Z2 Z2 Z1 Z1 kN Centco4 Serration optional Inch or metric Centrifugal force compensation for highest speeds CENTCO 4 4-jaw chuck In the beginning the jaw pairs Z1 and Z2 only apply a centering- force that is necessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the clamping force necessary for machining is applied. Examples for workpieces 2+2 self centering + compensating clamping of round, thin-walled, POSSIBLE COST SAVINGS calculation example 3-chuck body normal chuck body €/set Centco4 €/Satz 1x Special jaws 1.500,-€ 1x Standard jaws 500,-€ 1x Standard jaws 375,-€ 1x Standard jaws 500,-€ 1x Special jaws 1.750,-€ 1x Standard jaws 500,-€ 1x Special jaws 2.000,-€ 1x Standard jaws 500,-€ Total at 1 set of jaws respectively 5.625,-€ Total at 1 set of jaws respectively 2000,-€ Cost savings at 1 set of jaws 0 € Cost savings at 1 set of jaws 3.625,-€ Rotational speed (min) normal 4-jaw chuck Actuation by central Piston via standard cylinder square / rectangular workpieces iregular shaped and 2+2 self centering and compensating clamping BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=