119 - HFKN-D 165 HFKN-D 210 HFKN-D 260 HFKN-D 315 HFKN-D 400 HFKN-D 500 - NST NST NST NST NST NST - 035958 034245 034197 034197 014812 014812 N - 14 17 21 21 25.5 25.5 H - 18.5 20.5 26.5 26.5 29 29 h - 6.5 7.5 10 10 11 11 ISO 4762-12.9 - M10 x 20 M12 x 25 M16 x 35 M16 x 35 M20 x 40 M20 x 40 - 50 70 150 150 300 300 HFKN-D 110 HFKN-D 165 HFKN-D 210 HFKN-D 260 HFKN-D 315 HFKN-D 400 HFKN-D 500 NSTE NSTE NSTE NSTE NSTE NSTE NSTE 038265 73061650 73062150 73063050 73063050 081817 081817 N 8 14 17 21 21 25.5 25.5 H 13.5 18.5 20.5 26.5 26.5 29 29 h 5.0 6.5 7.5 10 10 11 11 a 5 8 10 13 13 16 16 b 12 16 23 30 30 35 35 ISO 4762-12.9 M6 x 20 M10 x 20 M12 x 25 M16 x 35 M16 x 35 M20 x 40 M20 x 40 16 50 70 150 150 300 300 HFKN-M 110 HFKN-M 165 HFKN-M 210 HFKN-M 260 HFKN-M 315 HFKN-M 400 HFKN-M 500 - NSTE-M NSTE-M NSTE-M NSTE-M NSTE-M NSTE-M - 73061602 73062101 73062501 73063050 081817 081817 N - 12 14 16 21 25.5 25.5 H - 18.5 20.5 26.5 26.5 29 29 h - 6.5 7.5 10 10 11 11 a - 8 10 13 13 16 16 b - 20 25 30 30 35 35 ISO 4762-12.9 - M10 x 20 M12 x 25 M12 x 35 M16 x 35 M20 x 40 M20 x 40 - 50 70 70 150 300 300 N H h H h b a N H h b a N NST NSTE NSTE HFKN-D HFKN-C HFKN-M INCH SERRATION ■ T-Nuts ■ Grease METRIC SERRATION Grease gun Grease K05® Important for maintenance and safe operation, to be ordered with the chuck Grease gun (DIN 1283) for cartridges 14 Oz. (DIN 1284) ■ Also refillable from grease can 1000 g. Chuck T-nut type Id. No. Cyl.-screw Torque Md max. (Nm) Chuck T-nut type Id. No. Cyl.-screw Torque Md max. (Nm) Chuck T-nut type Id. No. Cyl.-screw Torque Md max. (Nm) Special grease for manual and power chucks ■ High adhesion ■ High resistance against coolant ■ High load bearing capacity ■ Low friction coefficient ■ Avoids tribocorrosion Cartridge 14 Oz. (DIN 1284) Grease content 500 g Id. No. 016440 Can 1000 g Id. No. 011881 Lubrication set Id. No. 083726 Supply range ■ Grease gun ■ 1 Adapter flexible for high pressure grease nipple ■ 1 Adapter for cone grease nipple TONGUE & GROOVE T-nuts suitable for HFKN-D T-nuts suitable for HFKN-D T-nuts suitable for HFKN-M 2 BIS Specials Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566
RkJQdWJsaXNoZXIy NDg1ODE=