783 ROTA FSW Futterschnellwechsel | Chuck Quick-change Wechsel ohne Verdrehen des Drehfutters Das Drehfutter kann direkt auf den Futterschnellwechsel FSW aufgesetzt werden. Ein Verdrehen des Spannfutters ist nicht erforderlich. Die Orientierung erfolgt über den integrierten Positionierstein. 1 Positionierstein Change without twisting the chuck The lathe chuck can be mounted on the chuck quick-change using a direct motion. Twisting of the lathe chuck is not necessary. Orientation is performed using the integrated positioning block. 1 Positioning block Geringe Bauhöhe Der kompakte Futterschnellwechsel ROTA FSW kann nachträglich an die Maschinenspindel angebaut werden. Die geringe Bauhöhe lässt weiterhin eine große Ausnutzung des Maschinenraumes zu. Low height The ROTA FSW compact chuck quick-change can be retrofitted to the machine spindle. The low height still leaves plenty of space to use the machine room. Flexadapter mit großem Durchlass Der Futterschnellwechsel für Drehmaschinen ist in drei Baugrößen mit folgenden Durchgangsbohrungen lieferbar: • 51 mm (ISO 702-1 Nr. 8) • 81 mm (ISO 702-1 Nr. 11) • 116 mm (ISO 702-1 Nr. 15) 1 Durchgangsbohrung Flexible adapter with large through-hole The chuck quick-change unit for lathes is available in three sizes with the following through-holes: • 51 mm (ISO 702-1 No. 8) • 81 mm (ISO 702-1 No. 11) • 116 mm (ISO 702-1 No. 15) 1 Through-hole Höhere Einzugskraft unter Rotation Dreht sich der Futterschnellwechsel, wird die Einzugskraft des Futterschnellwechsel ROTA FSW weiter verstärkt. Die Fliehkraft treibt die Spannschieber unter Drehzahl nach radial außen und zieht das Spannmittel zusätzlich zur manuell eingeleiteten Einzugskraft gegen die Plananlagefläche. Higher pull-down force under rotation When the chuck quick-change system turns, the pull-down force of the ROTA FSW chuck quick-change is further reinforced. The centrifugal force drives the clamping slides under speed radially to the outside, and additionally draws the clamping device to the manually actuated pull-down force against the contact surface. 1 1 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 BIS Specials
RkJQdWJsaXNoZXIy NDg1ODE=