428 ROTA NCO Kraftspannfutter ohne Durchgangsbohrung | Power Lathe Chucks without Through-hole Drei standardisierte Backenschnittstellen verfügbar Wählen Sie aus drei standardisierten Backenschnittstellen und profitieren Sie davon, vorhandene Aufsatzbacken auf dem neuen SCHUNK-Futter weiterhin verwenden zu können. 1 Spitzverzahnung • 1/16" x 90° • 3/32" x 90° 2 Metrischer Kreuzversatz Three standardized jaw interfaces available Select one standardized jaw interface from the 3 standardized versions and benefit from the fact that existing top jaws can also be used on the new SCHUNK lathe chuck. 1 Fine serration • 1/16" x 90° • 3/32" x 90° 2 Metric tongue and groove Justierbare Messingabstreifleisten Justierbare Messingabstreifleisten dichten die Grundbacken ab und bieten guten Schutz gegen Kühlschmiermittel und Späne. Adjustable brass wiper bars Adjustable brass wiper bars seal the base jaws to give protection against coolant and chips. Modifikation Kühlschmierstoffzufuhr Für Drehmaschinen mit integrierter Kühlschmierstoffzuführung durch die Spindel kann der Kühlschmierstoff durch das Drehfutter direkt an das Werkstück geführt werden. Modification coolant supply The lathes with integrated coolant supply via the spindle can be directly fed to the workpiece through the lathe chuck. Modifikation Luftanlagekontrolle In der automatisierten Serienfertigung kann mittels Luftanlagekontrolle überprüft werden, ob das Werkstück anliegt und sicher gespannt werden kann. Modification air control In automated series production, air control can be used to check whether the workpiece is in contact and can be clamped securely. 1 2 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 BIS Specials
RkJQdWJsaXNoZXIy NDg1ODE=