121 ROTA-M flex 2+2 Handspannfutter | Manual Lathe Chucks Funktionsweise: Ausgleichende Werkstückspannung | Functionality: Compensating Workpiece Clamping Schritt 1: Werkstück einlegen Im geöffneten Zustand können runde, kubische oder geometrisch unförmige Teile eingelegt werden. Step 1: Insert the workpiece Round, cubic or geometrically unshaped parts can be inserted in open state. Schritt 2: Anlage des ersten Backenpaares Durch Betätigen des Handspannfutters legt sich das erste Backenpaar an das Werkstück an. Das Werkstück ist nun in dieser Ebene zentriert. Step 2: Install the first pair of jaws By actuating the manual lathe chuck, the first pair of jaws contacts the workpiece. The workpiece is now centered in this plane. Schritt 3: Anlage des zweiten Backenpaares Bei der weiteren Betätigung legt sich auch das zweite Backenpaar an das Werkstück an und verschiebt das Werkstück in dieser Ebene ins Zentrum. Step 3: Install the second pair of jaws During further actuation, the second pair of jaws also contacts the workpiece and moves the workpiece in this plane to the center. Schritt 4: Spannen des Werkstücks Liegen beide Backenpaare am Werkstück an, wird dieses gleichmäßig mit der vollen Spannkraft (abhängig vom Drehmoment) zentrisch gespannt. Step 4: Clamp the workpiece If both pairs of jaws are in contact with the workpiece, the workpiece is clamped evenly and centrally with the full clamping force (depending on the torque). Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 BIS Specials
RkJQdWJsaXNoZXIy NDg1ODE=