Rego-Fix BIS Specials

82 REGO-FIX AG ER System / Product catalog ER-MB Clamping capacity h7 Type Part no. [mm] [decimal inch] ER 8-MB Ø 0.2 mm 1308.00200 0.2 0.0079 Ø 0.3 mm 1308.00300 0.3 0.0118 Ø 0.4 mm 1308.00400 0.4 0.0157 Ø 0.5 mm 1308.00500 0.5 0.0197 Ø 0.6 mm 1308.00600 0.6 0.0236 Ø 0.7 mm 1308.00700 0.7 0.0276 Ø 0.8 mm 1308.00800 0.8 0.0315 Ø 0.9 mm 1308.00900 0.9 0.0354 ER 11-MB Ø 0.2 mm 1311.00200 0.2 0.0079 Ø 0.3 mm 1311.00300 0.3 0.0118 Ø 0.4 mm 1311.00400 0.4 0.0157 Ø 0.5 mm 1311.00500 0.5 0.0197 Ø 0.6 mm 1311.00600 0.6 0.0236 Ø 0.7 mm 1311.00700 0.7 0.0276 Ø 0.8 mm 1311.00800 0.8 0.0315 Ø 0.9 mm 1311.00900 0.9 0.0354 ER 16-MB Ø 0.2 mm 1316.00200 0.2 0.0079 Ø 0.3 mm 1316.00300 0.3 0.0118 Ø 0.4 mm 1316.00400 0.4 0.0157 Ø 0.5 mm 1316.00500 0.5 0.0197 Ø 0.6 mm 1316.00600 0.6 0.0236 Ø 0.7 mm 1316.00700 0.7 0.0276 Ø 0.8 mm 1316.00800 0.8 0.0315 Ø 0.9 mm 1316.00900 0.9 0.0354 For further technical information, please refer to page 159. Microbore collets ER-MB ER 16-MB Expert advice Microbore collets have a runout of ≤6 µm. They have been developed by REGO-FIX especially for smallest tool shank diameters. For tool shanks with nominal diameter h7 tolerance only. ER-MB 2.1.1 www .bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com