Rego-Fix BIS Specials

66 REGO-FIX AG ER System / Product catalog 1.2 ER tapping holders ER thread-cutting solutions CYL SSY / HSK-A SSY Softsynchro ® tapping holder // With minimum length compensation // Eliminates small synchronization errors of machines Applications // Machines for direct thread cutting // For all tapping tools with h9 shanks // The turning movement of the spindles can be offset with the feed axis and thus synchronized // Synchronization errors are created by the dynamics of the spindle and linear drives. The tapping holder is equipped with the minimum length compensation and compensates the synchronization errors // Guides coolant with up to 50 bar of pressure to the tap, without compromising length compensation // Depending on the application, the service life for the customer can be increased by up to 150 % Summary The axial forces increase with increasing speed. With a rigid colletholder, the forces occurring when forming threads are considerably higher than with the Softsynchro ® tapping holder. This allows for the optimum use of the synchronous spindle with the best possible service life and thread surface quality. CYL GSF tapping holder // With length compensation // For machines without a tapping option Applications // Used on machines in which the feed movement is not synchronized with the thread pitch during processing // Ensures the compensation of differences between the thread pitch and spindle feed // Features a pressure-point mechanism // Safe tap cutting // Uniform, reproducible thread depths // Guides coolant with up to 50 bar of pressure to the tap, without compromising length compensation // Universal use thanks to its compact design and low gauge length 3.000 Axial force [N] 2.500 2.000 1.500 1.000 500 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Time [s] Comparative axial force testing Occurring axial forces with thread forms M10 in St37. Speed 500 rpm Source: In-house testing 3.000 Axial force [N] 2.500 2.000 1.500 1.000 500 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Time [s] REGO-FIX Softsynchro ® tapping holders Competitor synchronous colletholder Rigid synchronous colletholder Comparative axial force testing Occurring axial forces with thread forms M10 in St37. Speed 2,000 rpm Source: In-house testing ER tapping holders 1.2 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected] Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected]

RkJQdWJsaXNoZXIy NDg1ODE=