Rego-Fix BIS Specials

18 REGO-FIX AG PG System / Product catalog 1.1.1 SK interface SK steep taper colletholders Universally suitable for different machining applications. DIN 69871 / DIN ISO 7388-1 Features and benefits Total system runout TIR ≤3 μm Our holistic system consists of a powRgrip ® colletholder and collet. All components together ensure best runout and accuracy. Colletholder runout TIR ≤1 μm Measured from collet cavity to outer taper. Taper accuracy AT3 Better spindle-to-holder fit and accuracy. Surface finish max. Ra 0.25 Achieve high clamping force and high transferable torque. Balancing 100 % balanced to G 2.5 @ 22,000 rpm. Balancing in XL colletholders 100 % balanced to G 2.5 @ 5,000 rpm. Hi-Q ® balancing system Ready to accept Hi-Q ® balancing rings which allow for the offset of the imbalance introduced by the cutting tool up to 80,000 rpm depending on the balancing rings used. All colletholders with the additional type information “H” in the part number are designed for balancing rings. Vibration dampening Our holders offer good vibration dampening to sustain a high surface finish and can help prevent chatter. ID chip hole In accordance with DIN 69873 for 10 mm diameter. SK SK-B 1.1.1