Rego-Fix BIS Specials

Assembling Inserted DS Disk removal Insert tool 33 REGO-FIX AG MR System / Product catalog DS  Sealing disks DS Assembling Insert the small diameter of the disk into the center of the coolant nut. Apply an even pressure until the disk is properly seated into the nut. The disk must be flush with the outside of the nut and the marking on the disk must be visible inside of the nut. Removing To remove the disk, simply press on the outside of the disk evenly until it snaps out. Expert advice Insert tool with the shank side first. O-ring might be damaged if cutting tool is inserted from the back with the cutting-edge side. 3.5 DS .2.1