Rego-Fix BIS Specials

A B L1 A B L1 Assembling Disassembling 30 REGO-FIX AG MR System / Product catalog Assembly instructions for MR clamping nuts // Click the collet in the nut and experience the power of the unique collet-locking system // Put the tool in the collet (minimum insertion length should be 2  / 3 of the collet length, only norm size shafts may be used; never clamp over- or undersized shafts // Put the nut, collet and tool combination on the colletholder using the correct mounting block interface adapter // Use the correct freewheel wrench head A-FLS with the smallest torque wrench that can be used for the correct amount of torque needed for this MR nut in combination with the MR collet and the specific tool shank size For recommended tightening torque please refer to list on page 50. Disassembly instructions After the nut is unscrewed from the colletholder, press on the face of the collet while simultaneously pushing sideways on the back of the collet opposite the mark, until it disengages from the clamping nut. Expert advice We recommend the use of REGO-FIX torque wrenches to prevent any damages to the MR nut. For recommended REGO-FIX accessories, please refer to page 4 2. 3.1 MR clamping nuts Proper assembly protects your runout TIR MR MRC 3.1 MR clamping nuts