Rego-Fix BIS Specials

Assembling Disassembling 24 REGO-FIX AG MR System / Product catalog Mounting instructions Finest quality deserves best treatment Correct assembly increases your collet life and ensures low runout TIR. Assembly instructions for MR collets // Insert collet groove into the eccentric ring of the clamping nut at the mark on the bottom of the nut // Push the collet in the direction of the arrow until it clicks in place // Screw the nut with the collet onto the colletholder // We recommend to tighten the nut with a torque wrench For recommended tightening torque please refer to list on page 50. Disassembly instructions After the nut is unscrewed from the colletholder, press on the face of the collet while simultaneously pushing sideways on the back of the collet opposite the mark, until it disengages from the clamping nut. Expert advice Improper assembly can permanently damage the runout TIR of the collet and may result in the destruction of the clamping nut. Only mount clamping nuts with correctly assembled collets. 2.0 MR collets