Rego-Fix BIS Specials

124 REGO-FIX AG ER System / Product catalog 3.2.2 reCool ® RCS Fast and easy retrofitting: From external flood cooling to internal cooling Advantages of internal cooling with reCool ® // Optimum coolant supply for all tools, also for difficult to access machining // No scattering or spray losses // Optimized coolant quantity for each tool // Best chip removal Disadvantages of standard peripheral cooling // Limited adjustment of the nozzles or spray tubes with different tool lengths and diameters // Reduction of tool life since coolant is not led directly to the cutting edge // Scattering losses of the spray jet // Bad chip removal Key features of reCool ® static RCS for use with static holders // Cost-friendly conversion of existing tooling systems to through coolant in only two minutes // For ER collets (DIN 6499 / I SO 15488) in stationary colletholders with exte rnal fine threads* // Coo lant pressures o f up to 150 bar** // RCS / E RMX for e mulsion and oil coolants // Low-main tena nce design // For coolant through tools (with sealing disks DS) and for peripheral cooling (with coolant flush disks KS) * reCool ® static can also be used for internal threading with the corresponding adapter. ** With high-pressure hoses RHS-HP. 100 bar with standard hose. Retrofitted internal cooling with reCool ® Standard peripheral cooling RCS 3.2.2 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com