Rego-Fix BIS Specials

122 REGO-FIX AG ER System / Product catalog 3.2.1 reCool ® RCR Retrofit driven tools and turning machines to internal cooling with reCool ® Key features of reCool ® rotary RCR for use with spindles // Cost-friendly conversion of existing tooling systems to through coolant in only two minutes // For ER and ERM nuts in dr iven tools and turning machines and for ER collets to ISO 15488 / DIN 6499 // Spe eds up to 12,000 rpm* // Coolan t pressure s up to 58 bar in RCR / ER** // Maintena nce- free coolant lubricated bearings // For coolant through tools (with sealing disks DS) and for peripheral cooling (with coolant flush disks KS) // RCR / ER for emulsion coolants and RCR / ERM for emulsion and oil coolants // Convert inner-threaded driven tools to outer-threaded, using the reCool ® adapter. Thus, successfully prepare different types of driven tooling for the use of reCool ® // Not for use with sealed collets * 6,000 rpm with RCR / ER 40. ** Coolant pressures up to 100 or 150 bar for RCR/ERM. Retrofitted internal cooling with reCool ® Standard peripheral cooling Expert advice reCool ® RCR is designed for standard covered machines due to the constant loss of coolant of the wet- bearing system. The amount of coolant loss may be influenced and enlarged due to pressure, throughput, viscosity, RPM, tool length and tool diameter. Please contact your REGO-FIX specialist to learn more about working with reCool ® . RCR 3.2.1 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected] Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected]