Rego-Fix BIS Specials

C B A L1 L2 Hi-Q ®  / ERMC B L1 L2 A C Expert advice We recommend tightening the clamping nuts using our torque wrench. For tightening torque recommendations, please refer to page 157. 114 REGO-FIX AG ER System / Product catalog 3.1.3 Hi-Q ® ERM / ERMC Hi-Q ® / ERM minimal external diameter Hi-Q ® / ERMC for coolant through tools Application The mini clamping nut Hi-Q ® / ERM is recom- mended for use where minimal external diameters are essential (e.g., machining space is very limited). Thus, it is ideally suitable for multispindle drilling heads and collet- holder extensions. The corresponding wrenches have the same external dimensions as the clamping nuts. Application with sealing disk / coolant flush disk The Hi-Q ® / ERMC clamping nut is intended for use with the sealing disk system DS / ER and the coolant flush system KS / ER. The disk system allows the use of all standard ER collets, ultraprecision collets and tapping collets for coolant through tools. // Up to 150 bar coolant pressure // Prevents dirt and chips from entering the collet For peripheral cooling of non coolant through tools we recommend the coolant flush disks KS / ER. Please refer to page 136ff. Hi-Q ®  / ERMC 11 This clamping nut is recommended for use where minimal external diameters are important. It is the coolant through tools version of the Hi-Q ® / ERM 11 clamping nut. Hi-Q ®  / ERM 11 does not require sealing disks The sealing system is built into the clamping nut. // Up to 150 bar coolant pressure // Prevents dirt and chips from entering the collet // Not interchangeable with nuts according to DIN 6499 / ISO 15488 Hi-Q ®   /ERM Hi-Q ®   /ERMC 3.1.3 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected] Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: [email protected]

RkJQdWJsaXNoZXIy NDg1ODE=