Rego-Fix BIS Specials

C B A SW L1 L2 341120700 Hi-Q_ERC11 Skizzenfaktor 1 Musterabstand 1 C B SW L2 L1 A C B A L1 L2 Hi-Q ®  / ERC 16 – ERC 20 Hi-Q ®  / ERC 11 Hi-Q ®  / ERC 25 – ERC 50 110 REGO-FIX AG ER System / Product catalog 3.1.1 Hi-Q ® ER / ERC standard Hi-Q ® / ERC for coolant through tools Application with sealing disk / coolant flush disk The Hi-Q ® / ERC clamping nut is intended for use with the sealing disk system DS / ER and the cool flush system KS / ER. The disk system allows the use of all standard ER collets, ultraprecision collets and tapping collets for coolant through tools. // Up to 150 bar coolant pressure // Prevents dirt and chips from entering the collet For peripheral cooling of non coolant through tools we recommend the coolant flush disks KS / ER. Please refer to page 136ff. Hi-Q ®  / ERC 11 This clamping nut is recommended for use where minimal external diameters are important. The Hi-Q ®  / ERC 11 clamping nut for coolant through tools is the internal cooling version of the Hi-Q ®  / ER 11 clamping nut Hi-Q ®  / ERC 11 does not require sealing disks The sealing system is built into the clamping nut. // Up to 150 bar coolant pressure // Prevents dirt and chips from entering the collet Expert advice We recommend tightening the clamping nuts using a torque wrench. For tightening torque recommendations, please refer to page 157. Hi-Q ®   /ER Hi-Q ®   /ERC 3.1.1 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com