Rego-Fix BIS Specials

PCM ET1 102 REGO-FIX AG ER System / Product catalog 2.2.2 PCM ET1 ER tapping collets PCM ET1 PCM ET1 tapping collets with axial compensation offer a smart and cost-effective toolholding option for machines which need axial compensation for tapping. Key features Tapping collets with axial compensation Interchangeable With REGO-FIX standard ER collet DIN 6499 / ISO 15488. Compatibility PCM ET1-12 is compatible with ER11 colletholders. Cost saving No expensive tapping tools necessary. Spring tension Adapted to tap size. Compact Very robust design with smallest space requirement. Directions for use The following tapping process is recommended for tapping collets PCM ET1: Fast approach, then tapping feed with approximately 95 % of the pitch value, which uses 20 to  30 % of the compensation stroke when the spindle rotation and the feed movement are simultaneously reversed. Return feed must be made with 100 % of the pitch, which maintains the sleeve of the tapping collet in the compensation stroke up to the tap disengagement; quick return can then be programmed with usual stroke security. The relatively long axial compensation assists easy programming. When tapping with very high speed, an appropriate programming compensation may be necessary to balance the differences of inertia between the spindle and the feed movement on reverse. In order to not disturb the axial compensation, use external coolant supply only. Please refer to pag e 66 f or additional information on REGO-FIX tapping holders. For additional technical information and dimensions of taps on PCM ET1, please refer to pages 159. Expert advice Not for coolant through tools and not for applications with sealing disks. PCM ET1 PCM ET1 2.2.2 www.bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com Website: www.bisspecials.com Tel: (+31) 0313 482566 Email: info@bisspecials.com