217 18 20.8 18 9.0 5.5 3.0 1.8 1.5 2.5 40～20040～15019.0 0.6 0.2 Jig Module KN311 One unit is equipped with three gripping functions. ■Dimensional Drawings 12-M8 depth 16 Air exhaust (for Seating confirmation) Rc1/8 Air supply port (Seating confirmation) Rc1/4 (Air supply port for Ungrip) 4-M10 depth 23 2-M6 depth 10 Guide blocks (2 places in all) T-slot interval of table Rc1/4 (Air supply port for Grip) Clamp metal (option) Rc1/8 Air Supply port on the backside (Seating confirmation) Rc1/8 Air Supply port on the backside (Ungrip) Rc1/8 Air Supply port on the backside (Grip) Note : Grip metals for mounting main part can be optionally offered. Centring/ Compensation Face grip Centring/ Compensation Face grip Centring/ Compensation Face grip Centring/ Compensation Face grip Centring/ Compensation Face grip Centralizing Grip Centralizing Center compensation grip Compensating End face grip Face Grip Face gripping by pull down Compensating gripping using pin locators and pull down External gripping by pull down Datum-pin Air Seating confirmation can be checked ■ Specifications Securely grips a wide range of irregularly shaped components New clamping system accommodates a variety of work-pieces ●Option of lock valve mechanism meaning that during machining work-pieces can be held without air line ●Centralizing or compensating is switchable ●Face grip (end grip) is possible ●Seating confirmation can be checked automatically Cylinder Stroke mm Jaw Stroke mm Max. Gripping Force kN Min. Gripping Force kN Max. Oscillating amount mm Work-piece size mm Net Weight kg Max. air pressure MPa Min. air pressure MPa Work Gripper Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com BIS Specials ワークグリッパ
RkJQdWJsaXNoZXIy NDg1ODE=