213 PUES06 A h7 B C D E F G max. min. H J K L M N P Q STU（U）VWXY 203 165 165 125 157 23 46.9 44.5 31 M6 40 37 33 30 65 185 M10 11 103 138 47 60 45 55 PUES06 10.3 4.8 20 57 0.7 1.3 0.2 φ70～φ87 φ89～φ108 φ44～φ70 21 0.54 QVFT17 R （±0.2） Rc1/8 2-Rc1/4 M 12-Q E G φK Rc1/8 2-Rc1/8 φA φB Y X D F 3-J φC （U） U L H 45° 30° 15° 6-S 4-φT φR 45° 30° 15° 15° 47 N 80 3-Q 2-φ10H7 W V P Internal Pull Lock Work Gripper Suitable for 3 to 5-Axis machines Cost reduction achieved by built-in Cylinder Wide gripping range with the use of optional jaws ■ Dimensions ■Dimensional Drawings ●Pull back and clamping the inner diameter of work-pieces Suitable for finish machining with stationary machining accuracy. ●Cost reduction achieved by built-in Cylinder No need to introduce separated Cylinder for Chuck. ●Wide gripping range with the use of optional jaw ●Available on the standard column of machine Total height is reduced by built-in Cylinder. Dimensions Model M6 Depth 11 ■ Specifications ※Clamping force varies in clamping state for jaws and work-pieces. ※Air Consumption = Under Pressure 0.6MPa Plunger Stroke per 5mm Model Specifications Plunger Stroke mm Jaw Stroke (diameter) mm Gripping Force kN Pneumatic at 0.6MPa Hydraulic at 1.3MPa Max. allowable pressure MPa Pneumatic Standard jaws Option jaws Master jaws Hydraulic Min. allowable pressure MPa Net Weight with Soft top jaws kg Air consumption （N♣） Gripping range mm Work Gripper close open Lock valve (LV-3) area (Air supply port for grip-confirmation) (Air Supply port for Jaw OPEN/CLOSE) Lock valve (LV-3) area Master jaws (Air supply port for grip-confirmation) Jaw (Supply port for opening and closing jaw) (From the rear side) Lock valve unit (LV-3) specification (for air) ※Provide a lubricater in the piping circuit. ※By opening jaws the chuck clamps ID of the workpiece. Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com BIS Specials ワークグリッパ
RkJQdWJsaXNoZXIy NDg1ODE=