211 PWS06 15.50 4.96 3.05 3.80 20.06 18.89 19.33 20.70 18.48 19.33 ABCDEFGHJK PWS06 15.03 5.59 3.43 4.27 16.28 15.08 15.53 17.17 14.52 15.53 ABCDEFGHJK PWS06 A h7 B C D E ＋0.02 0 F min G H J K L M N P Q STU（U）VWXY 203 164.5 162 118 30.17 5.5 44 19.3 38.07 29.36 15 67.5 47.7 50.8 185 M10 11 103 138 47 60 45 55 PWS06 11.1 7.7 19 53 0.7 1.3 0.2 120 13 160 70 24 0.54 QXT17 2-Rc1/8 6-S U （U） Rc1/8 2-Rc1/4 15°15° 30° 45° 15° 30° 45° K Q 2-φ10H7 4-φT V φA 30 15 30 X Y D J P N L M φC 3-G Rc1/8 φE F φB 47 80 φH φR W R （±0.2） 2.4°1.5° (D) min.C max.B min.F (G) (K) min.J max.E max.H max.B A min.C max.E min.F max.H min.J (D) (K) 1.5°2.4° (G) A ※Provide a lubricater in the piping circuit. Power Wing Work Gripper ■Dimensional Drawings Suitable for 3 to 5-Axis machines Cost reduction achieved by built-in Cylinder ■ Dimensions ※The dimensions of (U)/X/Y marked are the size of LV-3(Lock-valve). external φ Internal φ ■Dimensions for actuated position (External Gripping) ■Dimensions for actuated position (Internal Gripping) ■Dimensional Drawing for actuated position (External Gripping) ■Dimensional Drawing for actuated position (Internal Gripping) ■ Specifications Depth 12 (Supply port for opening and closing jaw)(From the rear side) close open Lock valve (LV-3) area (Air Supply port for Jaw OPEN/CLOSE) (Air supply port for grip-confirmation) To be sealed with an exclusive locator before use. Simplified cover Lock valve (LV-3) area (Air supply port for grip-confirmation) Lock valve unit (LV-3) specification (for air) ※Each value in（ ）indicate that surface of chuck and Jaw mounting side is parallel. ※Each value in（ ）indicate that surface of chuck and Jaw mounting side is parallel. ●Stationary clamping by pull back the work-pieces Suitable for rough machining, OP-10 or OP-20 with reduced setup time. ●Cost reduction achieved by built-in Cylinder ＊No need to introduce separated Cylinder for Chuck. ●Available on the standard column of machine ＊Total height is reduced by built-in Cylinder. ●Available to be mounted on NC Rotary Table Dimensions Model Model ※Gripping dia./gripping range is with standard soft jaws. ※Clamping force varies in clamping state for jaws and work-pieces. ※Air Consumption = Under Pressure 0.6MPa Plunger Stroke per 5mm Specifications Plunger Stroke mm Jaw Stroke (diameter) mm Gripping Force kN Pneumatic at 0.6MPa Hydraulic at 1.3MPa Max. allowable pressure MPa Pneumatic Hydraulic Min. allowable pressure MPa Net Weight with Soft top jaws kg Air consumption （N♣） Gripping range mm Max. Max. Min. Min. Dimensions Model Dimensions Model Work Gripper Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com Tel: (0031) 0313 482566 Website: www.bisspecials.com Email: info@bisspecials.com BIS Specials ワークグリッパ
RkJQdWJsaXNoZXIy NDg1ODE=